22 min read

How AI Agents Are Changing RMM in 2026

How AI Agents Are Changing Remote Monitoring and Management in 2026

Remote monitoring and management (RMM) software has traditionally relied on predefined rules, scripts, and workflows to help IT teams monitor endpoints, resolve problems, deploy updates, and manage devices at scale.

AI agents are expanding what these systems can do. By combining artificial intelligence with authorized access to management tools, agents can investigate endpoint problems, analyze diagnostic information, select appropriate actions, and coordinate multistep workflows.

In 2026, this shift is becoming visible in actual endpoint management products. Microsoft has introduced AI-assisted device investigation through Copilot in Intune, while Level's command-line interface (CLI) enables compatible external AI coding agents to interact with RMM resources.

These developments represent different levels of AI capability, from assisting technicians with information gathering to allowing agents to execute authorized management operations.

For managed service providers (MSPs) and internal IT teams, the opportunity extends beyond faster troubleshooting. AI agents could change how technicians investigate incidents, build automations, manage endpoint fleets, and prioritize operational work.

However, greater autonomy also creates new requirements for security, reliability, and accountability.

Understanding what AI agents can accomplish today, where their limitations remain, and how to integrate them safely is essential for organizations evaluating the next generation of RMM.

What Are AI Agents in Remote Monitoring and Management?

An AI agent is a software system that uses artificial intelligence to pursue a defined objective by interpreting information, selecting tools, and performing actions within its available capabilities.

In an RMM environment, an AI agent may interact with endpoint inventory, monitoring alerts, diagnostic tools, scripts, and automation workflows.

Unlike a conventional chatbot that primarily generates responses, a tool-enabled AI agent can interact with external systems to gather information or perform authorized operations.

For example, a technician investigating a failing application might ask an agent to:

  1. Identify the affected endpoint.
  2. Retrieve its operating system and application information.
  3. Inspect relevant diagnostic output.
  4. Identify possible causes of the failure.
  5. Recommend an appropriate remediation.
  6. Execute an approved procedure through the RMM platform.
  7. Verify whether the original problem has been resolved.

These capabilities depend on the specific agent, its integrations, and the permissions granted to it.

Not every AI feature in an endpoint management platform supports autonomous execution.

AI Agents vs. Traditional RMM Automation

Traditional RMM automation follows established triggers, conditions, and actions.

For example, an administrator may configure a monitoring policy to detect when a Windows service stops and trigger a script that attempts to restart it.

The workflow is predictable because the administrator has already defined the response.

An AI agent introduces a contextual decision-making layer.

Instead of immediately applying a predefined solution, the agent may examine available evidence, investigate possible causes, and determine which authorized procedure is appropriate.

AI helps determine what needs to happen, while established RMM tools and approved workflows provide controlled execution.

AI-Powered Endpoint Management in 2026

AI capabilities in endpoint management are developing, but vendors are taking different approaches.

Two examples illustrate the distinction between AI-assisted analysis and tool-enabled agent operations.

Microsoft Copilot in Intune: AI-Assisted Investigation

Microsoft's Copilot in Intune allows administrators to use natural-language prompts to retrieve and interpret device management information.

Documented capabilities include:

  • Summarizing device information.
  • Reviewing installed applications and assigned policies.
  • Comparing the configurations of healthy and unhealthy devices.
  • Analyzing error codes and suggesting possible resolutions.
  • Retrieving device information within the administrator's existing access permissions.

For instance, an administrator can compare a malfunctioning workstation with a similar working device to identify differences in assigned configurations or policies.

This reduces the effort required to gather and interpret information during troubleshooting.

However, these investigative features should not be confused with unrestricted autonomous remediation.

The documented functionality demonstrates how generative AI can assist endpoint administrators without independently controlling every aspect of device management.

Level CLI: Connecting External AI Agents to RMM Tools

Level's September 14, 2026 release introduced a different integration model.

Through Level CLI, IT teams can connect compatible external AI coding agents, including Codex, Claude Code, and Gemini, to authorized Level management operations.

These agents can use available CLI commands to inspect devices, investigate alerts, run diagnostics, execute scripts, and work with monitors and automations.

Level also supports creating and updating monitoring and automation configurations as code, including diff and dry-run functionality for reviewing proposed changes.

This approach allows an external AI agent to use existing RMM capabilities rather than requiring the platform to provide its own AI model.

The distinction is important.

Microsoft's documented Intune experience demonstrates how AI can simplify analysis and administration. Level CLI demonstrates how external coding agents can interact with RMM management tools through an authorized interface.

Both reflect the direction of AI-assisted endpoint management, but they should not be treated as identical implementations.

How AI Agents Are Changing RMM Operations

1. Making Alert Investigation More Contextual

RMM monitoring tools detect conditions that require attention, but an alert rarely explains the complete cause.

High CPU utilization, for example, could result from a legitimate workload, a scheduled update, an application failure, or a resource-intensive background process.

Traditional monitoring identifies the condition. Technicians still need to investigate its significance.

An AI agent connected to appropriate diagnostic tools can help organize this investigation.

A typical process could include retrieving the affected device's monitoring history, checking active processes, examining relevant diagnostic output, and comparing the findings against the alert condition.

The agent might identify that high resource utilization coincides with a scheduled maintenance task.

Alternatively, it might find evidence of an application process consuming increasing amounts of memory over time.

The value is not simply generating a faster response to an alert. It is helping technicians distinguish between conditions requiring intervention and those that may resolve without action.

An agent should still recognize when available information is insufficient to establish a cause.

2. Coordinating Multistep Endpoint Troubleshooting

Troubleshooting often requires switching between several tools.

A technician investigating repeated application crashes may need to examine system information, review logs, confirm installed software versions, inspect running processes, and compare the affected device against a working endpoint.

AI agents can help coordinate these activities when the necessary management interfaces are available.

Instead of manually collecting and interpreting every result, the technician can give the agent an investigation objective.

The agent may then retrieve relevant information, identify patterns, and propose additional diagnostic steps.

For example, an agent investigating a recurring Windows service failure might discover an event indicating that the service cannot bind to a required network port.

The agent could recommend checking whether another process already occupies that port rather than repeatedly restarting the service.

This demonstrates where contextual investigation provides value beyond a conventional restart automation.

However, AI-generated diagnoses should be grounded in actual system evidence. A plausible explanation is not a confirmed root cause.

3. Improving Automation Development

Creating reliable RMM automation requires technical knowledge of triggers, conditions, scripts, device targeting, and execution behavior.

AI agents can assist administrators with this development process.

An administrator might ask an agent to draft a monitoring policy for endpoints with consistently low available storage.

The agent could prepare the necessary configuration, explain its proposed conditions, and identify the diagnostic or remediation procedures associated with the alert.

A technician can then review the configuration before deployment.

This is particularly useful when the agent has access to documentation describing the actual commands and configuration formats supported by the management platform.

Nevertheless, AI-generated automation must be treated as proposed configuration until validated.

Incorrect targeting, unsupported parameters, inappropriate execution privileges, or poorly chosen thresholds can cause operational problems.

Established scripts and automation workflows should remain the preferred method for repeatable corrective actions.

4. Supporting Patch Management and Remediation

Patch management involves more than identifying available software updates.

IT teams must consider device eligibility, failed installations, restart requirements, deployment groups, maintenance windows, and potential business disruption.

AI agents can assist by interpreting available patch information and organizing follow-up work.

For example, an agent could examine endpoints with failed updates, identify recurring error conditions, and suggest which devices require further investigation.

It could also help draft scripts or procedures for approved remediation activities.

However, an agent should not interpret the availability of an update as proof that it is appropriate for immediate production deployment.

Patch testing, rollout scheduling, approval requirements, and recovery planning remain essential.

For organizations managing Windows, macOS, and Linux endpoints, these activities can be supported by a platform with established patch management and deployment controls.

5. Helping MSPs Manage Larger Endpoint Fleets

MSPs frequently support multiple customers with different applications, device configurations, policies, and operational requirements.

As endpoint counts grow, technicians spend increasing amounts of time locating information, investigating repetitive problems, and coordinating routine administrative work.

AI agents can help reduce the manual effort associated with these activities.

An agent with appropriate access could summarize alerts across an authorized device group, investigate repeated failures, or prepare diagnostic scripts for technician review.

It could also identify similar incidents that may benefit from a standardized remediation procedure.

This creates an opportunity to scale certain management activities without requiring technicians to perform every investigative step manually.

However, MSP environments also introduce customer isolation requirements.

An AI agent must operate within the permissions and device scopes assigned to it. Access to one customer environment must not implicitly authorize changes to another.

Example: AI-Assisted Disk Space Troubleshooting

Consider an MSP supporting several hundred endpoints.

A group of managed workstations repeatedly generates low disk space alerts.

The technical challenge is not identifying that storage is low. The RMM platform already provides that information.

The challenge is determining why the devices are running out of space, which corrective actions are appropriate, and whether the problem can be prevented from recurring.

The following is an illustrative workflow based on capabilities documented for tool-enabled RMM agents. It is not an independently tested production deployment or evidence of measured customer results.

Step 1: Identify Affected Devices

The monitoring system detects endpoints that meet configured storage thresholds.

An authorized AI agent retrieves the affected device list and relevant information, such as operating system, available disk space, and active alerts.

The agent should use unambiguous device identifiers, particularly when multiple customers have endpoints with similar names.

Step 2: Collect Read-Only Diagnostics

The agent requests approved diagnostic information to determine which directories or processes are consuming storage.

Relevant information may include temporary files, application caches, log directories, or unusually large files.

The initial investigation should avoid modifying files or executing cleanup commands.

Step 3: Distinguish Safe Remediation From Escalation

The agent reviews the diagnostic results and identifies potential corrective actions.

For example, an oversized application log directory may be suitable for an established log retention procedure.

However, a directory containing business application data, database files, or unfamiliar system files requires additional investigation.

The agent should not infer that files are safe to delete simply because they are large or old.

When the cause is uncertain, the workflow should escalate to a technician.

Step 4: Propose an Approved Action

If an established remediation procedure applies, the agent prepares the proposed action and identifies the devices it would affect.

The technician reviews the target scope, execution privileges, expected outcome, and potential risks.

Where necessary, the action is tested on a noncritical endpoint before broader execution.

Step 5: Execute and Monitor

After the required authorization, the RMM platform executes the approved procedure.

The agent or technician reviews execution results, including failures and devices that did not complete the action.

Failed operations should not automatically trigger unlimited retries.

Step 6: Verify the Actual Outcome

The workflow checks the affected devices after remediation.

Successful execution is not sufficient evidence that the underlying problem has been fixed.

Verification should confirm that:

  • Available storage has increased as expected.
  • The relevant alert condition has cleared.
  • No new operational errors were introduced.
  • Devices with recurring storage pressure are identified for further investigation.

Step 7: Prevent Recurrence

If the investigation reveals a common, predictable cause, the MSP can develop a standardized monitoring or remediation procedure.

For example, an approved log retention workflow may prevent recurring storage problems caused by an application generating excessive diagnostic files.

The resulting automation should use established triggers, conditions, and execution controls.

This illustrates a practical division of responsibility:

AI supports diagnosis and workflow development. RMM automation provides consistent execution. Technicians retain responsibility for validating operational decisions.

How MSPs Can Measure the Business Value of AI-Assisted RMM

AI agents introduce potential efficiency gains, but they also create operating costs.

These may include AI model usage, integration development, technician review, security controls, and ongoing maintenance.

MSPs should evaluate whether the technology produces measurable operational improvements rather than assuming that increased automation automatically translates into profitability.

Measure Technician Time Saved

A useful starting point is comparing the handling time of equivalent support activities before and after introducing AI assistance.

For example, consider a recurring alert investigation that previously required 15 minutes of technician work.

After introducing AI-assisted diagnostics, the technician might spend five minutes reviewing evidence and approving the appropriate next step.

The illustrative time saving is:

15 minutes - 5 minutes = 10 minutes per incident.

If the workflow handles 100 comparable incidents per month, the potential gross technician time saving would be:

100 × 10 minutes = 1,000 minutes, or approximately 16.7 hours per month.

This is an illustrative calculation, not a published performance result.

Actual savings must account for failed investigations, additional verification, and the time required to maintain the agent-assisted workflow.

Account for AI Operating Costs

A basic evaluation can use the following formula:

Net monthly operational value = Value of technician time saved - Additional AI operating costs

For this calculation, the value of technician time saved should use an appropriate loaded labor rate or another defensible measure of productive capacity.

The assisted handling time must include the technician review and verification required to complete the incident.

Any review labor already included in that handling time should not be deducted again as a separate operating expense.

Additional costs may include:

  • AI model or token usage.
  • Integration setup and maintenance.
  • Security administration.
  • Ongoing testing and workflow maintenance.
  • Additional work caused by incorrect recommendations or unsuccessful operations that is not already reflected in the measured handling time.

Labor time saved should not automatically be described as a reduction in payroll expenses.

The economic benefit may instead come from increased technician capacity, improved service responsiveness, or the ability to support additional endpoints.

RMM tools often provide administrative capabilities across large numbers of endpoints.

These capabilities may include command execution, remote access, software deployment, and configuration changes.

Connecting AI agents to these tools increases the importance of protecting identities, permissions, and execution boundaries.

In August 2026, the National Institute of Standards and Technology (NIST) published guidance discussing why agentic AI requires strong identity and authorization foundations.

The publication emphasizes the need for authorization controls as AI agents gain the ability to perform consequential operations.

See NIST's analysis of AI agent identity and authorization.

Excessive Administrative Permissions

An agent operating under a highly privileged account may have access to more systems and operations than its assigned task requires.

Organizations should apply least-privilege principles and limit access to authorized resources.

Initial deployments should prioritize read-only investigation before introducing permissions for modifying production systems.

Incorrect or Unsafe Commands

An AI-generated command may be syntactically valid but inappropriate for the target environment.

A cleanup procedure suitable for a temporary directory, for example, could cause serious problems when applied to a directory used by a production application.

High-impact operations should require suitable validation, authorization, and recovery planning.

Prompt Injection Through Untrusted Information

AI agents may process external data, including diagnostic output, logs, tickets, documentation, or web content.

This information could contain malicious instructions designed to influence the agent.

For example, an attacker-controlled log entry might include text instructing an agent to ignore its assigned task and execute an unrelated command.

The log entry is diagnostic data, not an authorized instruction.

Security boundaries must prevent untrusted content from overriding the agent's permitted actions.

Incomplete or Misleading Diagnostic Results

An agent may produce a confident explanation even when available data is incomplete.

This creates a risk that technicians accept an incorrect diagnosis without examining the underlying evidence.

Agent-generated conclusions should reference the actual information retrieved, identify uncertainty where relevant, and distinguish confirmed observations from possible explanations.

Uncontrolled Remediation

Repeated attempts to fix a problem can increase disruption when the original diagnosis is wrong.

Organizations should define limits on retries, affected device counts, concurrent execution, and permitted actions.

Critical operations should also have a documented interruption or recovery procedure.

Accountability and Auditability

IT teams need to understand which operations were executed, what resources were affected, and which permissions authorized the actions.

Appropriate audit records should capture relevant tool activity, execution results, approvals, and changes.

These requirements become especially important in environments where a single administrative identity can access multiple customer systems.

How to Introduce AI Agents Into an Existing RMM Environment

AI adoption should begin with a specific operational problem rather than a goal of maximizing automation.

A controlled implementation process helps organizations evaluate practical benefits while limiting unnecessary risk.

1. Start With Read-Only Investigation

Select repetitive activities that involve gathering and interpreting information.

Examples include summarizing device alerts, comparing endpoint configurations, and collecting diagnostic evidence.

These tasks allow teams to evaluate the quality of AI output without immediately granting broad execution capabilities.

2. Define Permissions and Scope

Determine which devices, customer environments, and management resources the agent can access.

Separate permissions for reading information, drafting changes, and executing commands.

Use platform-enforced controls rather than relying exclusively on instructions within the AI agent's prompt.

3. Use Existing Scripts and Procedures

Connect agent-assisted workflows to established operational procedures wherever possible.

An agent can recommend an existing remediation script or help develop a new one, but unverified commands should not automatically replace proven automation.

4. Test Representative Scenarios

Evaluate the agent against realistic operational problems, including cases where diagnostic information is incomplete or misleading.

Tests should consider diagnostic accuracy, execution safety, handling of failures, and compliance with authorization boundaries.

5. Introduce Controlled Execution

Expand from read-only access to approved execution capabilities only after the organization has established appropriate safeguards.

Define which actions require human approval and which may execute automatically within a limited scope.

Confirm that approval requirements are enforced by the relevant tools or operational controls rather than assuming that the AI agent will always request permission.

6. Measure and Refine

Monitor technician time, incident outcomes, error rates, and operating costs.

Expand agent-assisted workflows only when the organization can demonstrate that the benefits outweigh the added complexity and risk.

How Level Supports AI Agents With Level CLI

Level provides an example of how AI agents can interact with established RMM functionality without replacing the underlying management platform.

Its Level CLI, introduced with support for external AI coding agents in September 2026, allows administrators and compatible agents to interact with Level resources through command-line operations.

This includes access to supported device information, alerts, updates, scripts, monitors, and automations.

How Level CLI and AI Agents Work Together

Level CLI, called lvl, provides a command-line interface for managing authorized Level resources.

A compatible external AI coding agent can use these commands to investigate problems, retrieve information, and prepare or execute supported operations.

Level provides an Agent Skill that describes the CLI's available commands and output formats.

This skill is generated from the installed CLI version, helping compatible coding agents understand how to interact with the available command interface.

For example, the command:

lvl skill show

Displays the generated skill reference without installing it.

The command:

lvl skill install

Installs the skill for supported coding agents.

Administrators can also use lvl skill describe to inspect command groups, available parameters, and output definitions.

This reduces the need for an AI agent to infer how the CLI works.

Level's Bring Your Own Agent documentation explains the supported setup process and provides examples involving device investigation, diagnostic scripts, monitoring policies, and automation development.

Separating the AI Agent From the Endpoint Agent

The external AI coding agent is not the same as the Level agent installed on managed endpoints.

The endpoint agent enables Level's monitoring and management capabilities.

The external AI agent operates through the CLI in an authenticated environment.

Level does not provide the external language model or its tokens as part of this integration. Teams select and configure their own compatible coding agent and model provider.

This distinction gives organizations flexibility in choosing their preferred AI tools while retaining Level as the underlying endpoint management platform.

Reviewing Changes Before Execution

Level CLI supports diff and dry-run functionality for supported automation and monitoring configuration changes.

This allows administrators to inspect certain proposed changes before applying them.

However, dry-run functionality does not mean every operation is automatically safe, reversible, or transactional.

Level's documentation identifies important limitations.

For example, applying an automation specification can reconcile the existing automation with the supplied configuration. Triggers or actions omitted from that specification may be removed.

Changes can also be applied sequentially rather than as a single transaction, meaning an error may leave some earlier modifications in place.

Administrators should therefore review proposed configurations, retain current exports where appropriate, and verify the results after execution.

These safeguards are particularly important when an AI agent generates or modifies configuration files.

Understanding Execution Permissions and Approval Requirements

Level CLI actions operate under the permissions of the authenticated Level user.

CLI access must be enabled for the user's role, and Level records actions in its audit history.

However, platform permissions do not mean that every potentially disruptive CLI command automatically requires human approval.

Level's documentation identifies several execution behaviors that administrators should understand:

  • Script creation and ad hoc script execution default to the SYSTEM run-as setting unless another setting is specified.
  • Some operations, including device restart and shutdown, can request execution immediately without an additional confirmation prompt.
  • Permanent deletion commands generally require confirmation, but non-interactive tools can provide the --yes flag to satisfy that requirement.
  • Certain operations execute asynchronously, so a successful request does not necessarily indicate that the endpoint has completed the action.

These distinctions are particularly important when connecting an external coding agent.

An agent operating under an account with sufficient permissions may be able to invoke privileged operations without a separate technician approval step.

Administrators must therefore establish appropriate permission boundaries, agent configuration controls, and operational approval procedures.

Where a less privileged execution context is appropriate, administrators should explicitly configure it rather than relying on default script settings.

For MSPs, the authenticated identity and available resource scope should reflect the customer environment and assigned operational task.

An agent should not receive broader access simply because it supports additional CLI commands.

See Level's CLI getting started guide for authentication, execution, and command reference details.

Combining AI Investigation With Level Automation

Level's automation platform supports event-driven workflows, including monitoring triggers, schedules, device enrollment, and other supported conditions.

Its scripting capabilities allow technicians to execute supported scripts and review results across managed endpoints.

Together with Level CLI, these tools create a practical approach to AI-assisted operations.

A connected AI coding agent can help investigate an alert, review relevant device information, and prepare a diagnostic or automation procedure.

The technician can evaluate the proposed approach and use Level's existing tools to perform authorized operations.

This combines contextual AI assistance with established RMM execution capabilities.

For MSPs and IT teams interested in evaluating this model, explore Level CLI or review the getting started documentation.

What Comes Next for AI Agents in RMM?

The developments visible in 2026 suggest that AI-assisted endpoint management is moving beyond conversational interfaces toward deeper integration with operational tools.

Three areas are particularly important.

More Contextual Technical Investigation

AI agents can help technicians connect diagnostic information across monitoring, inventory, configuration, and scripting tools.

The quality of these investigations will depend on the completeness and reliability of the underlying data.

Greater Integration With Existing Automation

Rather than replacing conventional automation, AI agents can help administrators determine when to use established procedures, develop new workflows, and investigate failed operations.

This approach preserves the predictability of rule-based execution while introducing more flexible analysis.

Stronger Controls Over Agent Identity and Execution

As agents gain access to administrative tools, identity management and authorization become increasingly important.

Organizations will need clear boundaries governing what agents may access, which operations they may perform, and when human intervention is required.

The long-term value of AI-assisted RMM will depend as much on these operational controls as on improvements in AI models.

Final Thoughts

AI agents are changing remote monitoring and management by introducing contextual investigation and flexible tool use into established endpoint management workflows.

In 2026, products such as Microsoft Intune and Level demonstrate different approaches to this transition, from AI-assisted device analysis to connecting external coding agents with authorized management tools.

For MSPs and internal IT teams, the practical opportunity lies in reducing repetitive investigation, improving automation development, and using technician expertise more effectively.

Successful adoption requires measurable benefits, reliable diagnostic information, appropriate permissions, and controlled execution.

The strongest approach is not to replace traditional RMM automation with AI. It is to combine AI-assisted decision-making with dependable monitoring, established workflows, and accountable IT operations.

Frequently Asked Questions

1. What is an AI agent in RMM software?

An AI agent in RMM software is an AI-powered system that can interpret endpoint information, investigate alerts, and interact with authorized management tools. Depending on its capabilities and permissions, it may recommend troubleshooting steps, prepare automation workflows, or execute management operations.

2. Can AI agents automatically troubleshoot and fix endpoint problems?

AI agents can assist with troubleshooting and may execute remediation actions when connected to appropriate tools. However, autonomous execution depends on the platform's capabilities, available permissions, and configured safeguards. Organizations should establish approval requirements and verification procedures for potentially disruptive operations rather than assuming every action automatically requires human confirmation.

3. How are AI agents different from traditional RMM automation?

Traditional RMM automation follows predefined triggers, conditions, and actions. AI agents can interpret contextual information, select tools, and adapt their investigation based on new evidence. Both approaches can work together, with AI supporting diagnosis and established automation handling predictable execution.

4. Does Level support AI agents for remote monitoring and management?

Yes. Level supports compatible external AI coding agents through Level CLI. Agents can use authorized CLI commands to inspect endpoint information, investigate alerts, and assist with scripts, monitors, and automations. Operations remain governed by the authenticated user's permissions, and Level records actions in its audit history. Administrators are responsible for configuring appropriate safeguards around privileged execution.